I was thinking of setting up a home surveilance system using Frigate, and integrating it with Home Assistant. I’d probably have somewhere on the order of 10-15 1080p 30fps cameras. I’m not sure what components I should get for the server, as I am unsure of the actual processing requirements.

EDIT 1: For some extra information, I did find that Frigate has a recommended hardware page.

  • Kalcifer@lemmy.worldOPEnglish
    1·
    1 year ago

    That’s quite a few cameras. I would do an audit on how many you will actually need first, because you will likely find you could get by with 5-10.

    That’s a fair point. I haven’t actually methodically gone through to see exactly how many I would need just yet. The numbers that I chose were somewhat just ballpark off the top of my head.

    You will also want some form of reliable storage for your clips

    I am planning to give the camera server dedicated storage for the data. If I’m really feeling like splurging on it, I may look into getting WD Purple drives, or the like.

    as well as the ability to back up those clips/shots to the cloud somewhere.

    I’m not sure that I would need this very much. I’m mostly interested in a sort of ephemeral surveilance system; I only really need to store, at most, a few days, and then rewrite over it all.

    I’m personally running 4 cameras (3x1080 @ 15fps, 1x4k @ 25fps) through my ~7 year old Synology DS418play NAS

    Would you say that 15FPS is a good framerate for surveilance? Or could one get away with even less to lessen the resource requirements?

    whereas I can tweak stuff on Surveillance Station quite easily.

    What tweaking do you generally need to do for the camera server?

    • m1st3r2@butts.internationalEnglish
      5·
      1 year ago

      Would you say that 15FPS is a good framerate for surveilance? Or could one get away with even less to lessen the resource requirements?

      If doing CPU-based motion analysis, you could use a lower quality stream (if available from the cameras to avoid transcoding load) for motion detection, then use that to trigger recording on a higher quality stream.

      • Kalcifer@lemmy.worldOPEnglish
        1·
        1 year ago

        you could use a lower quality stream (…) for motion detection, then use that to trigger recording on a higher quality stream.

        Brilliant idea! Thank you for the suggestion!

        If doing CPU-based motion analysis

        Whyd do you specifically mention CPU-based motion analysis? Does this idea not work with the Google Coral TPU, for example?

        • m1st3r2@butts.internationalEnglish
          1·
          1 year ago

          I’m using ZoneMinder on my end with more rudimentary motion detection, hence CPU detection. (My current hardware is pre-IOMMU on the mobo, so no pci passthrough for me…)

          That said, if you have hardware that can handle X (via CPU, GPU, TPU, etc), then you gotta decide how you want to spend that. Whether resources are spent more in analysis fps or evaluating higher detail frames is up to what you need.

    • trankillity@lemmy.worldEnglish
      2·
      1 year ago

      I’m not sure that I would need this very much. I’m mostly interested in a sort of ephemeral surveilance system; I only really need to store, at most, a few days, and then rewrite over it all.

      This is exactly what I do. I simply cloud backup any event/object clips but only retain last 5 days. The cloud is if law enforcement needs it, or in the event of hardware failure/catastrophic house damage.

      What tweaking do you generally need to do for the camera server?

      Recording schedules change based on time of day/when we’re in/out of the house. This is all handled as automations through Home Assistant, but is set up through Surveillance Station NVR.