My laptop’s cpu normally idles at 40C but whenever I do something moderately complex it immediately shoots up to 60X and the cooling fan goes brrrr. I’ve tried replacing the thermal paste and even the heat pipe system but neither helped. :(
I don’t know but there’s not much I can do about cooling in a laptop. The laptop is 8 years old and I don’t use it enough for this issue to be that big of a deal.
If its a modern intel laptop, its likely the PL2 clocks. The PL2 level is basically a time interval where the cpus run at a higher boost clock than sustained turbo, and ia defined to run at that for a short time period (e.g about 40 seconds) before clocking to the standard boost clocks (PL1). Its why laptops heat up fast and ramp very quickly. It makes processors seem faster than they are. (Similar to like running speed in a 40 yard/meter dash vs a marathon running speed)
My laptop’s cpu normally idles at 40C but whenever I do something moderately complex it immediately shoots up to 60X and the cooling fan goes brrrr. I’ve tried replacing the thermal paste and even the heat pipe system but neither helped. :(
40C is a decently warm idle temperature, is your cooling system powerful enough?
I don’t know but there’s not much I can do about cooling in a laptop. The laptop is 8 years old and I don’t use it enough for this issue to be that big of a deal.
If its a modern intel laptop, its likely the PL2 clocks. The PL2 level is basically a time interval where the cpus run at a higher boost clock than sustained turbo, and ia defined to run at that for a short time period (e.g about 40 seconds) before clocking to the standard boost clocks (PL1). Its why laptops heat up fast and ramp very quickly. It makes processors seem faster than they are. (Similar to like running speed in a 40 yard/meter dash vs a marathon running speed)
The laptop has a 4th gen cpu, I think an i3 so it’s probably not classified as modern lol.
I see. I also have an old laptop (4th gen i7). I personally use throttlestop to limit its turbo clock speeds just for sake of noise.
I decided to try undervolting my laptop’s cpu and found the intel-undervolt tool. It seems that reducing cpu voltage by 25mV has solved the issue.
my PSU fan is clicking and im just llike “this is fine”