Agreed. The products I have used above, DrivePool, SnapRaid and UnRaid are all software solutions. This was important to me because I was reusing hardware and had a real eclectic mix of drives from 14TB NAS drives to 256GB laptop drives that I wanted to get more life out of.

The only hardware limitation is the parity based apps SnapRaid and UnRaid need your largest drive to be the parity one. Makes sense but in a situation like mine where I had a 14TB drive and the next closes was 8TB, that parity drive wasn’t well utilised. Not a big issue but.

As others have said, you certainly can.

If your current system is a Windows PC then a super easy way to go about it is to purchase a product called Stablebit DrivePool which will allow you to combine multiple hard disks into one drive, and then do duplication of data you find important. Share that virtual drive as a Share that your other systems can see. DriePool is a super reliable product. Only downside other than the one time cost is that its redundancy is based on file duplication, which has the benefit that you can pull your drives out and use them elsewhere as any one file is always contained on a single drive, but unlike parity based solutions it’s super space inefficient to retain duplicate copies. It’s a tradeoff between simplicity and time to recover in a failure versus maximising disk use and reducing costs. Depending what your NAS is for, maybe you don’t need that redundancy but. You can also team it up with another product called SnapRaid (which is free) which can make your redundancy parity based.

I ran DrivePool for years on Windows and it’s a great product. Windows itself isn’t overly optimised for this use case, but as a predominately Mac household having access to Windows on a headless system was handy if I had to run the odd Windows only apps, so using Windows had its perks.

While Windows and a PC will cost more to operate, you’ll potentially be out well ahead if you don’t have to buy additional hardware. It’s likely worth running what you have into the ground rather than buying new hardware. There’s guides on some things you can do to optimise Windows too.

I’ve since moved to using UnRaid which is a paid product (one time purchase) designed specifically for NAS on your own PC. Great solution but I’d say that the barrier of entry is much higher than a Windows box. Still very versatile product. Moved to that as over time I’ve used a bit more Linux in my life, and I also had reduced need for Windows as the NAS OS.

Haven’t tried TrueNas but that’d be an alternative to UnRaid.

It’s definitely worth thinking about your use case and whether a second hand mini-pc of some sort is a better option. Along with the Pi itself many people are probably going to need a new case and quite possibly a power adapter too given the new power profile. An older PC where that’s taken care off, and where you probably have a 120GB SSD included, could be the better option for some people.

Settings -> Appearance -> Show Comment Jump Button

I’m on the test flight beta so not sure if this options in the App Store release or not yet though.

I think they’re a bit damned if they do, damned if they don’t, given a lot of users are clamouring for these features however the TestFlight is full so new users that want to be on the bleeding edge can’t get in.

There was talk about removing test flight users that weren’t actively using the app, unsure if they’ve pursued that and if that’s the way forward, but it may be a short term fix if it is available.

I’m struggling to find where I heard about this, but if you post to Twitter (or I guess it’s X now) and tag @Sync, they should get back in touch with you and offer you a bonus 10GB for the positive outreach.

Since I don’t know about where I heard about the offer originally, the next best thing might be my post which Sync responded to as evidence of the bonus. Along with one or two other bonuses which one may have been a referral, I’m at 17GB on the free account which is pretty decent, and certainly not as burdensome as the referral process one has to go through with Dropbox to grow the free tier there.

They’re a great service from the time I’ve spent with it and worth a go.

Yeah I’ve had it. Noticed it under 0.4 consistently and believe I saw it just a bit earlier with 0.5 also.

Using the Dracula and Light theme set to match the OS current dark/light mode.

Their staff posted on their Reddit channels that it’s a limitation of their billing system, I believe in relation to having two different services at once. They said they’re working on updating the billing system to support this but I don’t recall an ETA.

I think you’d have to create a second account currently, but then you may lose access to the introductory pricing to Proton Pass if later you wanted to move back.

Thank you for the update and all the hard work going into the app. So crazy to think we’re calling it a slow week when it’s still only been days since the latest update.

Discord links not working for me right now, so might add the feedback here for now.

Just tried the Bean Lemmy client and was immediately struck by the bottom and top bars having a slight level of transparency of them which causes feed content to appear behind the bars very subtly. It’s a design trait that Apple uses throughout iOS/MacOS and Id like to see it in Memmy given Apple native apps do it.

I do acknowledge transparency is something many people find tacky, so suggesting maybe it could be a toggle under the theme settings to have the bottom and top navigation bars have a slight transparency, along with other relevant controls. That way people can enable or disable it based on what they like and how they’re theming the app.

I think the key question is to ask what about Googles solution is driving them to look elsewhere. Once that’s known it’s possible to work out if NextCloud deployed in house or via a partner is the right way forward, or if another cloud offering might be more suitable.

If those were my requirements then I’d be looking at Synology.

Currently using a Windows PC with Stablebit Drive Pool to pool about 10HDDs into one consolidated pool. Nice way to get a stack of storage and to repurpose an old PC I already had, but for a low effort option Synology would be my pick based on all the reports I’ve heard about it being a top notch option. My PC is fine but when things break you need to be able to troubleshoot a Windows setup, which is fine but maybe not for “mum and dad”.

Just pick a NAS from them that does what you need. Whenever I look at them it seems to be about determine how many drives you need and whether you want a high performance one (to run Plex servers and the like) or a low spec one that just does storage and some less intensive stuff.

Of the three, probably B.

I much prefer the current icon but to all three as the colour really pops on that one. I was very pleasantly surprised when that icon popped up on my device.

I like the new placement myself, but agree it’d be hard to know to long press the button if you didn’t know about it.

I think adding something to the Settings -> Accounts section would make sense as a secondary, more visible, option. Could show the active account and allow you to switch from there. Could also have some text detailing the “hold profile” option to help train users. The section already lists the active account so just need some sort of selection dropdown or “make active” button next to inactive ones.

I think a name change is a good idea. Not nuts on badger as a name, but don’t have a better suggestion on hand. As some thoughts though:

• I wouldn’t use the word “fedi” in the name as has been floated in places, as I think Fediverse itselfs a pretty bad name, and ideally a term users won’t have to think about when using the services.

• Make sure whatever you pick works well for any global markets you want to go into. Some projects pick something that sounds cool locally but has some negative meaning somewhere else

• I’m not against the space (or gods) theme, but I do think it’s being played out a bit heavily right now across many apps and maybe there’s another route to go. Voyager and “Lift Off” spring to mind as good apps playing with the space theme. Apollo as an app is front and centre in everyone’s mind right now, especially iOS users, and apps are drawing inspiration from it for their Lemmy apps. That’s a good thing, but I do think that branding is one area where perhaps apps have an opportunity to carve out their own identity and I’d think long and hard about naming an app as a distant tribute to Apollo, given that’ll probably tie the apps legacy to that and Reddit in general for some time. Again, I don’t hate space (or god) names, but I think there’s tremendous benefits in looking more broadly.

• And hey, while he’s seemingly not sold on the idea currently, Christian could very well release “Apollo for Lemmy” one day when he’s ready and he’s had time to distance himself from the events, so Memmy having rebranded to something that draws too much inspiration could taint the impressions of some users.

Just my thoughts anyway.

According to Steam it’s Left4Dead. That said, Steam only began tracking use in 2009. Not only do I expect my Left4Dead hours to be much higher as I played that mainly at launch in 2008, but I also think that game would be a distant second to Counterstrike Source which I played heavily around release while I was in university.

A number of people have touched on the perimeter security, but you can also look at your internal network too and whether you have the systems being exposed on vlans with firewalls preventing connectivity from those systems back to your other stuff that doesn’t need to be exposed. Could help cover you if a system is compromised due to bad config, zero day exploit, or whatever, by limiting the ability to then go sideways through your network to exploit other systems. Depending on what you are hosting there may be zero requirement for your externally facing server to need to talk to the majority of devices on your network, or the talk could be one way only (internal facing to external facing).

I have a few PIs already and like them, but if I was doing a system today I’d probably go with the HP Elite Desk (800 Gen 2 or 3 perhaps), sourced as an ex-gov unit which can be had very cheap. The PIs have gotten expensive enough that they’re basically price equivalent once you add a case and possibly an SSD to it, at least locally. Have used those HP systems at work and they’re decent little boxes.

The caveat is that I’m not too fussed if I’m drawing extra power, as long as the performance justifies it. If power was a primary concern then the PI may still win out. I’m also not going to need to consider size in anything I do, and then then the micro PC form factors aren’t massive.

My home servers a windows box so I use Backblaze which has unlimited storage for a reasonable fixed price. Have around 11TB backed up. Pay the extra few dollars for the extended 12 month retention of deleted files, which has saved me a few times when I needed to restore a file I couldn’t find.

Locally I run stablebit DrivePool and content is mirrored and pooled using that, which covers me for drive failures.

Somewhere such as banggood - https://m.banggood.com/Aqara-Zigbee-1_2-Version-Window-Door-Sensor-Smart-Home-Kit-Remote-Alarm-Eco-System-p-1149705.html

Usually grab them on sale. Also a few others from the Aqara family such as climate (humidity and temperature) that you can get cheap. Have a motion sensory from them too that works ok but i don’t currently have in use.

I combine these with a Conbee II and in home assistant I use ZHA (over deConz, which is an option too) to manage connectivity to the sensors. I don’t use the Aqara hub any more as I’d rather run things locally via home assistant than using a third party hub which removes any potential concern around privacy. I’m honestly not sure if these sensors are upgradable or not but they work reasonably enough. Maybe once every 6 months I need to spend 2 minutes reconnecting one but it’s not too common. It helps to have some ZigBee smart power plugs scattered throughout the house, even if you aren’t automating power to things, as they form a mesh network which can make battery powered sensors more reliable.

I picked ZHA over deConz largely in the basis it’s development was linked to home assistant so I figured over time it’d see more development from the home assistant devs.

I aim to use ZigBee where I can over WiFi or Bluetooth devices. Lower power and more responsive in my experience. Also frees up the wifi traffic and the more ZigBee things you add the more reliable the mesh network gets.